• Universal mounting allows you to install on a roof, wall mast or balcony
• For use with single-input receivers
• Detachable 30' cable for easy cable routing and installation
Terk XM6-Extended Information:
- ASYMMETRICAL ELECTRONIC CROSSOVER DESIGN
The advantage of asymmetrical crossovers over “symmetrical” crossovers is the ability of the former to eliminate undesirable peaks and dips in frequency response caused by resonant frequencies present in all enclosed space. Since
the crossover points can overlap or underlap the resonant frequencies (i.e. "asymmetrically"), Coustic XM6 series allows you to create an acoustically flat and smooth frequency response environment.
The XM6 crossover features pre-amp inputs for use with source units that have RCA or line level outputs. An independent set of line level inputs are provided on the XM6 for 2-, 4- or 6-channel connections.
This feature allows all XM6 outputs to be driven with either a 2-, 4- or 6-channel input configuration. An adapter is not needed to split the source signal to the “A”, “B”, and sub inputs when the XM6 is used with a source unit that only has a single or dual pair of RCA or line level outputs.
- DUAL STEREO AND SINGLE MONO LINE LEVEL OUTPUTS
The XM6 features three line level outputs each sending independent audio signals to designated amplifiers. Channel “A” and “B” on the XM6 both have stereo outputs while the sub channel output is mono.
- INDEPENDENT VARIABLE LEVEL CONTROLS
The adjustment of output levels allows precise control of the signals going to its respective amplifier. Channels “A” and “B” on the XM6 feature independent left and right output level controls allowing for accurate stereo balance within the vehicle. Since the sub channel output is mono, a single adjustable output level control is used to ensure a smooth low frequency response.
